Colonial Pipeline, headquartered in Alpharetta, Georgia, delivers a daily average of 100 million US gallons (380,000 m3) of gasoline, home heating oil, aviation fuel and other refined petroleum products to communities and businesses throughout the South and Eastern United States. Colonial consists of more than 5,500 mi (8,900 km) of pipeline, originating at Houston, Texas, and terminating at New York harbor. The pipeline travels through the coastal states of Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, North Carolina, Virginia, Maryland, Pennsylvania, and New Jersey. Branches from the main pipeline also reach Tennessee.

The main lines are 40 inches (1,000 mm) and 36 inches (910 mm) in diameter, with one primarily devoted to gasoline and the other carrying distillate products such as jet fuel, diesel fuel, and home heating oil. The pipeline connects directly to major airports along the system. Fifteen associated tank farms store more than 1.2 billion US gallons (4,500,000 m3) of fuel and provide a 45 day supply for local communities.

Products move through the mainlines at a rate of about 3 to 5 miles per hour (4.8 to 8.0 km/h). It generally takes from 14 to 24 days for a batch to get from Houston, Texas to the New York harbor, with 18.5 days the average time.[1]

Colonial Pipeline's owners include Koch Industries (aka Koch Capital Investments Company LLC, 28.09% stake ownership), Kohlberg Kravis Roberts (aka Keats Pipeline Investors LP, 23.44% stake ownership), Caisse de depot et placement du Quebec (16.55% stake ownership), Royal Dutch Shell (aka Shell Pipeline Company LP, 16.12% stake ownership), and Industry Funds Management (aka IFM (US) Colonial Pipeline 2 LLC, 16.08% stake ownership).


History

Construction of Colonial Pipeline's original system started in 1961.[1][2]

Following the passage of hurricane Ike in September 2008, this pipeline was operating at a severely reduced capacity due to a lack of supply from refineries that had closed, causing gasoline shortages across the Southeast.

Serious Spills:

Early on September 2, 1970, residents of Jacksonville, Maryland, detected gasoline odors and noticed gasoline in a small creek flowing beneath a nearby road. Because fumes were still present in the late afternoon of September 2, a resident notified Colonial at 6:19 p.m. about the situation. Colonial, which had a 30-inch-diameter pipeline situated about 1,700 feet east of the point where the creek passed under the road, shut down the Dorsey Junction, Maryland, pump station (the initial pump station for this section of the pipeline) at 6:34 p.m. About 12 hours later, on the morning of September 3, an explosion and fire occurred in a ditch in which contractor personnel for Colonial were manually digging to further expose the pipeline and catch gasoline trickling from the ground. Five persons were injured, none fatally. The leak point was found 4 days later. The failure resulted in a release of 30,186 gallons (718 barrels) of gasoline and kerosene.

At 9:51 p.m. on December 19, 1991, Colonial's Line 2, a 36-inch-diameter petroleum products pipeline, ruptured about 2.8 miles downstream of the company's Simpsonville, South Carolina, pump station.7 The rupture allowed more than 500,000 gallons (13,100 barrels) of diesel fuel to flow into Durbin Creek, causing environmental damage that affected 26 miles of waterways, including the Enoree River, which flows through Sumter National Forest. The spill also forced Clinton and Whitmire, South Carolina, to use alternative water supplies.[3]

On Sunday, March 28, 1993 at 8:48 a.m., a pressurized 36-inch-diameter (910 mm) petroleum product pipeline owned and operated by Colonial Pipeline Company ruptured near Herndon, Virginia. The rupture created a geyser which sprayed diesel fuel over 75 feet (23 m) into the air, coating overhead power lines and adjacent trees, and misting adjacent Virginia Electric Power Company buildings. The diesel fuel spewed from the rupture into an adjacent storm water management pond and flowed overland and through a network of storm sewer pipes before reaching Sugarland Run Creek, a tributary of the Potomac River.

In 1996, a 36 inch diameter Colonial pipeline ruptured at the Reedy River, near Fork Shoals, South Carolina, June 26. The ruptured pipeline released about 957,600 US gallons (3,625,000 L) of fuel oil into the Reedy River and surrounding areas. The spill polluted a 34-mile (55 km) stretch of the Reedy River, causing significant environmental damage. Floating oil extended about 23 miles (37 km) down the river. Approximately 35,000 fish were killed, along with other aquatic organisms and wildlife. The estimated cost to Colonial Pipeline for cleanup and settlement with the State of South Carolina was $20.5 million. No one was injured in the accident. The pipeline was operating at reduced pressure due to know corrosion issues, but pipeline operator confusion led to an accidental return to normal pressure in that pipeline section, causing the rupture.[4][5][6]

In 1997 On May 30, Colonial Pipeline spilled approximately 18,900 US gallons (72,000 L) of gasoline, some of which entered an unnamed creek and its adjoining shoreline in the Bear Creek watershed near Athens, Georgia. During the spill, a vapor cloud of gasoline formed, causing several Colonial employees to flee for safety. This spill resulted from a calculation error related to a regular procedure. No one checked the calculations, nor did Colonial have a procedure in place to check such calculations.[7]

See also

List of pipelines

Notes

External links

fr:Colonial Pipeline