Multiphase flow
In fluid mechanics, multiphase flow is a generalisation of the modelling used in two-phase flow to cases where the two phases are not chemically related (e.g. dusty gases) or where more than two phases are present (e.g. in modelling of propagating steam explosions).
Each of the phases is considered to have a separately defined volume fraction (the sum of which is unity), and velocity field. Conservation equations for the flow of each species (perhaps with terms for interchange between the phases), can then be written down straightforwardly.
The momentum equation for each phase is less straightforward. It can be shown that a common pressure field can be defined, and that each phase is subject to the gradient of this field, weighted by its volume fraction. Transfer of momentum between the phases is sometimes less straightforward to determine, and in addition, a very light phase in bubble form has a virtual mass associated with its acceleration. (The virtual mass of a single bubble is about half its displaced mass).
These terms, often called constitutive relations, are often strongly dependent on flow regime
See also
- Two-phase flow
- Buckley–Leverett equation
- Darcy's law for multiphase flow in porous media.
- Multiphase flow meter
- three phase flow meter
- Multiphase Heat Transfer
References
- Script error
- Wang, M. Impedance mapping of particulate multiphase flows, Flow Measurement and Instrumentation, (2005) Vol. 16
- Script error
- Script error
This fluid dynamics-related article is a stub. You can help Oilfield Wiki by expanding it. |
el:Πολυφασική ροή fr:Écoulement polyphasique ja:混相流 pt:Fluxo de multifase ro:Curgere multifazică