Profile

REMACUT Specialized on design and manufacture of Pipe Tensioners, Flexible Lay Equipment, Winches (Storage, Traction), Reel Drive System, Pipe Handling, Pipe Davits, Umbilical Spooling Winches, Stinger handling system. Internal line up Clamps, Welding carousel, Automation and Control Systems, Offshore Cranes Refurbishment, Subsea Repair Tools.

Address

via Albenga 38
Rivoli, 10090
Italy
Phone: +39-011-9576317
Fax: +39-011-9591008

Product

Name:PIPE HANDLING (SJ-DJ-QJ, Firing line, Stinger)
Description:REMACUT pipe handling systems cover all the range of pipe weights and dimensions, and can be design for SJ, DJ and QJ pipes.
Details:
Pipe handling equipment supplied are:
• Longitudinal Conveyors (idle, motorized, fixed, elevable)
• Line-up shoes (with or w/t spinning rollers)
• Transfer Car (V saddles or spinning rollers)
• Pipe Elevators
• Walking Beams
• Chain conveyors
• Pipe loaders
• Bevelling station supports
• Spinning rollers (fixed, elevable, for Welding or Coating)
• Pipe roller/track supports for Firing Ramp
• Pipe roller for Stinger

Digital position control applied to all the movements of pipe handling equipment and also allows the synchronisation of the pipes movement .The control system is designed to store into its memory several different machines positions, that are automatically executed at the operator's command.

Name:PIPE TENSIONERS (2track vertical, 4 track flex)
Description: Pipe tensioners are installed on board of Pipelay vessels. These are used to clamp/hold the pipe during thepipeline costruction and then to release pipeline in control mode during the pipelay. Backlog covers a pull force range from 5 to 400 mT.
Details:
Tensioners are sized with built-in safety factors to allow the use of the machine continuously up to the rated performances and accepting overloads up to the peak holding force without using overload capacity.Tensioners are equipped with a simple, reliable, maintenance free and very performing clamping system, the “elastic suspensions”, powered by air springs actuators. The elastic suspension and springs actuators allows the machine to absorb distributed and local pipe OD variation keeping constant the contact pressure applied to the pipe.

Name:WINCHES (Traction, Storage, A/R)
Description:For S-Lay and J-Lay process: - Traction Winch systems (capstan + storage + level winder) - Storage Winch integrated with level winder - A&R Storage Reels (for umbilical and hoses)
Details:
RE.MAC.UT has been developing Electric driven Winches for the abandonment and recovery that can be used on Pipe lay barges, Heavy-Lift Vessels operations. Depends on Client requirement these equipment can be supply with addition sheaves (fixed, retractable, instrumented with load cell and encoder), mobile tension meters completed with load cells, certified wire cable, Class Register design and manufacturing certificates of the equipment.

Press Release

REMACUT since 1974 design and manufacture new advanced machineries and equipment: Tensioners for rigid and flexible pipes, Capstan and Storage Winches, advanced Pipe handling system, Stinger rollers, Automation and Control Systems, Internal Line –up Clamps with radio control, Umbilical Spooling winches, Pipe Davits, Control system Refurbishment of Barge cranes, Subsea Tools. These can be applied to different pipe lay processes (shallow or deep water, S-lay, J-lay, Reel lay or Flexible lay) and big range of pipes (4”-72” OD, 6-52 m length). Equipment can be supplied certified by Class register (ABS, DNV, Lloyd’s Register, Rina, etc...).

External Link

REMACUT