Underground coal gasification
Process type chemical
Industrial sector(s) oil and gas industry
coal industry
Feedstock coal
Product(s) coal gas
Leading companies Linc Energy
Cougar Energy
Main facilities Angren Power Station (Uzbekistan)
Majuba Power Station (South Africa)
Chinchilla Demonstration Facility (Australia)
Inventor Carl Wilhelm Siemens
Year of invention 1868
Developer(s) Ergo Exergy Technologies
Skochinsky Institute of Mining

Underground coal gasification (UCG) is an industrial process, which converts coal into product gas. UCG is an in-situ gasification process carried out in non-mined coal seams using injection of oxidants, and bringing the product gas to surface through production wells drilled from the surface.

The product gas could to be used as a chemical feedstock or as fuel for power generation. The technique can be applied to resources that are otherwise unprofitable or technically complicated to extract by traditional mining methods, and it also offers an alternative to conventional coal mining methods for some resources.

History

The earliest recorded mention of the idea of underground coal gasification was in 1868, when Sir William Siemens in his address to the Chemical Society of London suggested the underground gasification of waste and slack coal in the mine.[1][2] Russian chemist Dmitri Mendeleyev further developed Siemens' idea over the next couple of decades.[2][3]

In 1909–1910, American, Canadian, and British patents were granted to American engineer Anson G. Betts for "a method of using unmined coal".[2][3] The first experimental work on UCG was planned to start in 1912 in Durham, the United Kingdom, under the leadership of Nobel Prize winner Sir William Ramsay. However, he was unable to commence the UCG field work before the beginning of the World War I, and the project was abandoned.[2][3]

Initial tests

In 1913, Ramsay's work was noticed by Russian exile Vladimir Lenin who wrote in the newspaper Pravda an article "Great Victory of Technology" promising to liberate workers from the hazardous work in the mines by underground coal gasification.[2][3][4] Between 1928 and 1939, underground tests were conducted in the Soviet Union by the state-owned organization Podzemgaz.[4] The first test using the chamber method started on 3 March 1933 in the Moscow coal basin at Krutova mine. This test and several following tests failed. The first successful test was conducted on 24 April 1934 in Lysychansk, Donetsk Basin by the Donetsk Institute of Coal Chemistry.[3]

The first pilot-scale process started 8 February 1935 in Horlivka, Donetsk Basin. Production gradually increased, and, in 1937–1938, the local chemical plant began using the produced gas. In 1940, experimental plants were built in Lysychansk and Tula.[3] After World War II, the Soviet activities culminated in the operation of five industrial-scale UCG plants in the early the 1960s. However, Soviet activities subsequently declined due to the discovery of extensive natural gas resources. In 1964, the Soviet program was downgraded.[3] As of 2004 only Angren site in Uzbekistan and Yuzhno-Abinsk site in Russia continued operations.[5]

Post-war experiments

After World War II, the shortage in energy and the diffusion of the Soviets' results provoked new interest in Western Europe and the United States. In the United States, tests were conducted in 1947–1960 in Gorgas, Alabama. From 1973–1989, an extensive test was carried out. The United States Department of Energy and several large oil and gas companies conducted several tests. Lawrence Livermore National Laboratory conducted three tests in 1976–1979 at the Hoe Creek test site in Campbell County, Wyoming.[2][3]

In cooperation with Sandia National Laboratories and Radian Corporation, Livermore conducted experiments in 1981–1982 at the WIDCO Mine near Centralia, Washington.[2] In 1979–1981, an underground gasification of steeply dipping seams was demonstrated near Rawlins, Wyoming. The program culminated in the Rocky Mountain trial in 1986–1988 near Hanna, Wyoming.[3][5]

In Europe, the stream method was tested at Bois-la-Dame, Belgium, in 1948 and in Jerada, Morocco, in 1949.[5] The borehole method was tested at Newman Spinney and Bayton, United Kingdom, in 1949–1950. A few years later, a first attempt was made to develop a commercial pilot plan, the P5 Trial, at Newman Spinney in 1958–1959.[3][5] During the 1960s, European work stopped, due to an abundance of energy and low oil prices, but recommenced in the 1980s. Field tests were conducted in 1981 at Bruay-en-Artois and in 1983–1984 at La Haute Deule, France, in 1982–1985 at Thulin, Belgium, and in 1992–1999 the El Tremedal site, Province of Teruel, Spain.[2] In 1988, the Commission of the European Communities and six European countries formed a European Working Group.[5]

In New Zealand, a small scale trial was operated in 1994 in the Huntly Coal Basin. In Australia, tests were conducted starting in 1999.[5] China has operated the largest program since the late 1980s, including 16 trials.[2][6]

Process

File:UCGprocessfigure-01.png
The underground coal gasification process.

Underground coal gasification converts coal to gas while still in the coal seam (in-situ). Gas is produced and extracted through wells drilled into the unmined coal–seam. Injection wells are used to supply the oxidants (air, oxygen, or steam) to ignite and fuel the underground combustion process. Separate production wells are used to bring the product gas to surface.[5][7] The high pressure combustion is conducted at temperature of 700–900 °C (1,290–1,650 °F), but it may reach up to 1,500 °C (2,730 °F).[2][5]

The process decomposes coal and generates carbon dioxide (CO2), hydrogen (H2), carbon monoxide (CO), methane (CH4). In addition, there are small quantities of various contaminants including sulfur oxides (SOx), mono-nitrogen oxides (NOx), and hydrogen sulfide(H2S).[5] As the coal face burns and the immediate area is depleted, the oxidants injected are controlled by the operator.[2]

There are a variety of designs for underground coal gasification, all of which are designed to provide a means of injecting oxidant and possibly steam into the reaction zone, and also to provide a path for production gases to flow in a controlled manner to surface. As coal varies considerably in its resistance to flow, depending on its age, composition and geological history, the natural permeability of the coal to transport the gas is generally not adequate. For high pressure break-up of the coal, hydro-fracturing, electric-linkage, and reverse combustion may be used in varying degrees.[2][7]

The simplest design uses two vertical wells: one injection and one production. Sometimes it is necessary to establish communication between the two wells, and a common method to use reverse combustion to open internal pathways in the coal. Another alternative is to drill a lateral well connecting the two vertical wells. UCG with simple vertical wells, inclined wells, and long directional wells was used in the Soviet Union. The Soviet UCG technology was further developed by Ergo Exergy and tested at Linc's Chinchilla site in 1999–2003, in Majuba UCG plant (2007–present), in Cougar Energy's UCG plant in Australia (2010). The same technology is being applied by several developers in UCG plants in New Zealand, Canada, USA, India and other countries.

In the 1980s and 1990s, a method known as CRIP (controlled retraction and injection point) was developed (but not patented) by the Lawrence Livermore National Laboratory and demonstrated in the United States and Spain. This method uses a vertical production well and an extended lateral well drilled directionally in the coal. The lateral well is used for injection of oxidant and steam, and the injection point can be changed by retracting the injector.

Carbon Energy was the first to adopt a system, which uses a pair of lateral wells in parallel. This system allows a consistent separation distance between the injection and production wells while progressively mining the coal between the two wells. It provides access to the greatest quantity of coal per well set and also allows greater consistency in production gas quality.[citation needed]

A new technology has been announced in May 2012 by developer Portman Energy wherein a method called SWIFT (Single Well Integrated Flow Tubing) uses a single vertical well for both Syngas recovery and oxidant delivery. The design has a single casing of tubing strings enclosed and filled with an inert gas to allow for leak monitoring, corrosion prevention and heat transfer. A series of horizontally drilled lateral oxidant delivery lines into the coal and a single or multiple syngas recovery pipeline(s) allow for a larger area of coal to be combusted at one time. The developers claim this method will increase the syngas production by up to ten (10) times prior design approaches and the single well design mean development costs are significantly lower and the facilities and wellheads are concentrated at a single point reducing surface access roads, pipelines and facilities footprint.[8]UCG: the 3rd way presentation

A wide variety of coals are amenable to the UCG process. Coal grades from lignite through to bituminous may be successfully gasified. A great many factors are taken into account in selecting appropriate locations for UCG, including surface conditions, hydrogeology, lithoglogy, coal quantity, and quality. According to Andrew Beath other important criteria includes:

  • Depth of 100–600 metres (330–2,000 ft)
  • Thickness more than 5 metres (16 ft)
  • Ash content less than 60%
  • Minimal discontinuities
  • Isolation from valued aquifers.[9]

According to Peter Sallans these criteria are:

  • Depth of 100–1,400 metres (330–4,600 ft)
  • Thickness more than 3 metres (9.8 ft)
  • Ash content less than 60%
  • Minimal discontinuities
  • Isolation from valued aquifers.[10]

Economics

Underground coal gasification allows access to coal resources that are not economically recoverable by other technologies, e.g., that are too deep, low grade, or seams too thin.[2] By some estimates, UCG will increase economically recoverable reserves by 600 billion tonnes.[11] Livermore estimates that UCG could increase recoverable coal reserves in the USA by 300%.[12] Livermore and Linc Energy claim that UCG capital and operating costs are lower than in traditional mining.[2][13]

UCG product gas is used to fire combined cycle gas turbine (CCGT) power plants, with some studies suggesting power island efficiencies of up to 55%, with a combined UCG/CCGT process efficiency of up to 43%. CCGT power plants using UCG product gas instead of natural gas can achieve higher outputs than pulverized-coal-fired power stations (and associated upstream processes, resulting in a large decrease in greenhouse gas (GHG) emissions.[citation needed]

UCG product gas can also be used for:

  • Synthesis of liquid fuels;
  • Manufacture of chemicals, such as ammonia and fertilizers;
  • Production of synthetic natural gas;
  • Production of hydrogen.

In addition, carbon dioxide produced as a by-product of underground coal gasification may be re-directed and used for enhanced oil recovery.[citation needed]

Underground product gas is an alternative to natural gas and potentially offers cost savings by eliminating mining, transport, and solid waste. The expected cost savings could increase given higher coal prices driven by emissions trading, taxes, and other emissions reduction policies, e.g. the Australian Government's proposed Carbon Pollution Reduction Scheme.[citation needed]

Projects

Cougar Energy and Linc Energy have conducted pilot projects in Australia based on UCG technology provided by Ergo Exergy.[14][15][16][17][18] Yerostigaz, a subsidiary of Linc Energy, produces about 1 million cubic metres (35 million cubic feet) of syngas per day in Angren, Uzbekistan. The produced syngas is used as fuel in the Angren Power Station.[19] In South Africa, Eskom (with Ergo Exergy as technology provider) is operating a demonstration plant in preparation for supplying commercial quantities of syngas for commercial production of electricity.[20][21][22] ENN has also operated a successful pilot project in China.[citation needed]

In addition, there are companies developing projects in Australia, UK, Hungary, Pakistan, Poland, Canada, US, Chile, China, Indonesia, India, South Africa, Botswana, and other countries.[20] According to the Zeus Development Corporation, more than 60 projects are in development around the world.

Environmental and social impacts

Eliminating mining eliminates mine safety issues.[23] Compared to traditional coal mining and processing, the underground coal gasification eliminates surface damage and solid waste discharge, and reduces sulfur dioxide (SO2) and nitrogen oxide (NOx) emissions.[2][24] For comparison, the ash content of UCG syngas is estimated to be approximately 10 mg/m³ compared to smoke from traditional coal burning where ash content may be up to 70 mg/m³.[12] However, UCG operations cannot be controlled as precisely as surface gasifiers. Variables include the rate of water influx, the distribution of reactants in the gasification zone, and the growth rate of the cavity. These can only be estimated from temperature measurements, and analyzing product gas quality and quantity.[2]

Subsidence is a common issue with all forms of extractive industry. While UCG leaves the ash behind in the cavity, the depth of the void left after UCG is typically more than other methods of coal extraction.[2]

Underground combustion produces NOx and SO2 and lowers emissions, including acid rain. The process has advantages for geologic carbon storage.[2] Combining UCG with CCS technology allows re-injecting some of the CO2 on-site into the highly permeable rock created during the burning process, i.e. where the coal used to be.[25] Contaminants, such as ammonia and hydrogen sulfide, can be removed from product gas at a relatively low cost.[citation needed]

Aquifer contamination is a potential environmental concerns.[2][26] Organic and often toxic materials (such as phenol) remain in the underground chamber after gasification and, therefore, are likely to leach into ground water, absent appropriate site selection. Phenol leachate is the most significant environmental hazard due to its high water solubility and high reactiveness to gasification. Livermore conducted a burn at Hoe Creek, Wyoming, producing operating pressure in the burn cavity greater than the surrounding rock, forcing contaminants (including the carcinogen benzene) into potable groundwater.[12] However, some research has shown that the persistence of such substances in the water is short and that ground water recovers within two years.[24]

See also

References

  1. Script error
  2. 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 Script error
  3. 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Script error
  4. 4.0 4.1 Script error
  5. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 Script error
  6. "Underground Coal Gasification. Current Developments (1990 to date)". UCG Engineering Ltd. http://www.coal-ucg.com/current%20developments.html. Retrieved 24 November 2007.
  7. 7.0 7.1 "How UCG Works". UCG Association. http://www.ucgassociation.org/index.php?option=com_content&view=article&id=67&Itemid=216. Retrieved 11 November 2007.
  8. Presentation on SWIFT technology to UCG Association, London May 3rd 2012 entitled "UCG: the 3rd way"
  9. Script error
  10. Sallans, Peter (23 June 2010). "Choosing the Best Coals in the Best Locations for UCG" (PDF). Advanced Coal Technologies Conference. Laramie: University of Wyoming. http://www.advancedcoalconference.com/sites/default/files/ppt/Session-L-4-Peter-Sallans.pdf. Retrieved 10 July 2011.
  11. Script error
  12. 12.0 12.1 12.2 Walter, Katie (2007). "Fire in the Hole". Lawrence Livermore National Laboratory. https://www.llnl.gov/str/April07/Friedmann.html. Retrieved 6 October 2008.
  13. "Underground Coal Gasification". Linc Energy. http://www.lincenergy.com.au/ucg.php. Retrieved 18 July 2010.
  14. "Cougar Energy Update on UCG Pilot Project at Kingaroy in Queensland". OilVoice. 27 April 2010. http://www.oilvoice.com/n/Cougar_Energy_Update_on_UCG_Pilot_Project_at_Kingaroy_in_Queensland/e3e3d8b78.aspx. Retrieved 31 July 2010.
  15. "Cougar To Ramp Up UCG Process Down Under". Cougar Energy (Downstream Today). 16 March 2010. http://www.downstreamtoday.com/news/article.aspx?a_id=21673. Retrieved 31 July 2010.
  16. "Linc pilot flows first GTL fuel". Upstream Online (NHST Media Group). 14 October 2008. (subscription required). http://www.upstreamonline.com/live/article164782.ece. Retrieved 6 August 2009.
  17. "Linc Energy Opens CTL Demo Plant". Downstream Today. 24 April 2009. http://www.downstreamtoday.com/news/article.aspx?a_id=16131. Retrieved 6 August 2009.
  18. "Linc gears up for Chinchilla GTL". Upstream Online (NHST Media Group). 28 November 2007. (subscription required). http://www.upstreamonline.com/live/article144966.ece. Retrieved 6 August 2009.
  19. "Linc Energy Limited (ASX:LNC) Technology Update On Chinchilla Underground Coal Gasification (UCG) Operations". ABN Newswire (Asia Business News Ltd.). 10 March 2009. http://www.abnnewswire.net/press/en/60275/Linc-Energy-Limited-%28ASX:LNC%29-Technology-Update-On-Chinchilla-Underground-Coal-Gasification-%28UCG%29-Operations. Retrieved 8 August 2009.
  20. 20.0 20.1 "ESKOM's undergroud coal gasification project" (PDF). European Commission. 5 May 2008. http://ec.europa.eu/energy/international/bilateral_cooperation/doc/south_africa/eskom.pdf. Retrieved 4 September 2011.
  21. Venter, Irma (12 February 2007). "Coal experts search for ways to cut emissions". Mining Weekly (Creamer Media). http://www.miningweekly.com/article/coal-experts-search-for-ways-to-cut-emissions-2007-02-12. Retrieved 4 September 2011.
  22. Hannah, Jessica (12 August 2011). "Coal gasification demo plant design study under way". Mining Weekly (Creamer Media). http://www.miningweekly.com/article/design-study-under-way-for-coal-gasification-demonstration-plant-majuba-2011-08-12. Retrieved 4 September 2011.
  23. Script error
  24. 24.0 24.1 Shu-qin, L., Jun-hua, Y (2002). Environmental Benefits of underground coal gasification. Journal of Environmental Sciences, vol. 12, no. 2, pp.284-288
  25. Script error
  26. Script error

External links

ta:நிலத்தடி நிலக்கரி வளிமமாக்கல் uk:Підземна газифікація вугілля ur:زیر زمین کوئلے سے گیس کی تیاری